Recipes List

[jurgensplurgen]

Recipes

Originally posted by heavyiron

Several years ago, I learned how to convert pellets into injectible tren because my boyfriend (bless him) was useless with this kind of thing. I'd much rather he (and all of you) get the proper knowledge and a safe product than to buy from a UG that is probably converting in the bathroom sink. Once I found out how to get my hands on powders, I realized how easy and cost effective it is to convert them.

All the items needed to convert powders to injectable are easily procured online. Remember that you don't have to buy your supplies from a company that caters to bodybuilders. (these companies are usually more expensive because they know what you're using their stuff for.)

The only exception I've found is www.researchsupply.net. They have have bulk and retail pricing and are reliable. Remember that you can also buy from chemical supply houses, medical, and science supply online. Do a Google search for "science supplies" and you'll be surprised at what you can find for a very reasonable price.

Chemicals you'll need for almost every conversion:

BB: Benzyl benzoate
BA: Benzyl alcohol (make sure that you do not exceed 5% BA for any of the conversions)

For Liquid Orals:
PEG 300: Polyethylene Glycol

Oils:
Sesame oil is good, and so is grape see oil. Stay away from the thicker oils, and make sure you don't have an alergy to the oil you're using (walnut, for example).

Supplies:
Some companies sell sterile vials with the stopper and crimper already on them. This is good if you have only a small amount to make or only convert every once in a while. Remember to use a venting needle with these when adding your final conversion to them. (transfer air out while putting the product in.)


Syringes 3cc & 5/10cc or bigger
18 or 20 gauge needles to vent and to transfer
Vials/beakers/glass measuring cups for mixing - heat proof
Sterile Vials or vials/stoppers/crimper for your product
sterile filters - whatman or equivelent
plastic or glass mixing spoons/swizzles. No metal
shallow pan to sterilize vials and to heat up mixtures


These recipes are not mine. They are courtesy of KIAN PHILLIPS -- BSc/SpSc - CPT . I have made almost all of the recipes that follow except Winstrol. I also have not capped any powders, but the recipes are here. If you have questions about these recipes that I cannot answer, I'll contact Kian and try to get the answer for you.

Good Luck!


The procedures for each conversion are almost identical but the measurements differ so pay close attention to this fact.


-------------------------------------------------------

Conversions and Information listed on this page:

Deca-Durabolin - nandrolone decanoate -
Equipoise - boldenone undecylenate -
Test Cypionate
Test Enanthate
Test Propionate
Trenbolone (non pellet form)
Winstrol (injectable)
Anadrol
Anavar
Armidex
Clomid
Dianabol
Femara
Nolvadex
Proviron
Winstrol (oral)
Capping Powders

-------------------------------------------------------



Test Enanthate

Powder: 5 grams
Produces: 20 ml @ 250 mg/ml

Requirements:

5 grams testosterone enanthate
15.25 ml sesame oil
Benzyl Alcohol 1ml 5% BA
Syringes 3cc & 5/10cc
18 or 20 gauge needles
Vial
Sterile Vial
Whatman sterile filter

Procedure:

measure 5 grams of powder
place the powder in the vial
add BA to the vial
heat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)
add the oil to the vial but save 2 ml of oil in the syringe for later
gently shake the vial.
reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stove
place an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filter
place another needle in the sterile vial to relieve the pressure
draw out the solution with a syringe and run it though the Whatman filter
take the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.

Test Enanthate

Powder: 10 grams
Produces: 40 ml @ 250 mg/ml

Requirements:

10 grams testosterone enanthate
Benzyl Alcohol 2ml 5% BA
30.5 ml sesame oil
Syringes 3cc & 5/10cc
18 or 20 gauge needles
Vial
Sterile Vial
Whatman sterile filter

Procedure:

measure 10 grams of powder
place the powder in the vial
add BA to the vial
heat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)
add the oil to the vial but save 2 ml of oil in the syringe for later
gently shake the vial.
reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stove
place an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filter
place another needle in the sterile vial to relieve the pressure
draw out the solution with a syringe and run it though the Whatman filter
take the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.

Test Cypionate

Powder: 5 grams
Produces: 20 ml @ 250 mg/ml

Requirements:

5 grams testosterone cypionate
15.25 ml sesame oil
Benzyl Alcohol 1 ml 5% BA
Syringes 3cc & 5/10cc
18 or 20 gauge needles
Vial
Sterile Vial
Whatman sterile filter

Procedure:

measure 5 grams of powder
place the powder in the vial
add BA to the vial
heat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)
add the oil to the vial but save 2 ml of oil in the syringe for later
gently shake the vial.
reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stove
place an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filter
place another needle in the sterile vial to relieve the pressure
draw out the solution with a syringe and run it though the Whatman filter
take the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.

Test Cypionate

Powder: 10 grams
Produces: 40 ml @ 250 mg/ml

Requirements:

10 grams testosterone cypionate
30.5 ml sesame oil
Benzyl Alcohol 2 ml 5% BA
Syringes 3cc & 5/10cc
18 or 20 gauge needles
Vial
Sterile Vial
Whatman sterile filter

Procedure:

measure 10 grams of powder
place the powder in the vial
add BA to the vial
heat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)
add the oil to the vial but save 2 ml of oil in the syringe for later
gently shake the vial.
reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stove
place an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filter
place another needle in the sterile vial to relieve the pressure
draw out the solution with a syringe and run it though the Whatman filter
take the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.

Equipoise - boldenone undecylenate -

Note: Equipoise - boldenone undecylenate - is liquid at room temperature so use the following conversion: 1 ml of EQ = 1.18 grams

Powder: 5 grams
Produces: 25 ml @ 200 mg/ml

Requirements:

5 grams Equipoise - boldenone undecylenate -
20.50 ml sesame oil
Benzyl Alcohol 0.75 ml 3% BA
Syringes 3cc & 5/10cc
18 or 20 gauge needles
Vial
Sterile Vial
Whatman sterile filter

Procedure:

measure 5 grams of powder
place the powder in the vial
add BA to the vial
heat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)
add the oil to the vial but save 2 ml of oil in the syringe for later
gently shake the vial.
reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stove
place an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filter
place another needle in the sterile vial to relieve the pressure
draw out the solution with a syringe and run it though the Whatman filter
take the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.

Equipoise - boldenone undecylenate -

Note: Equipoise - boldenone undecylenate - is liquid at room temperature so use the following conversion: 1 ml of EQ = 1.18 grams

Powder: 10 grams
Produces: 50 ml @ 200 mg/ml

Requirements:

10 grams Equipoise - boldenone undecylenate -
41 ml sesame oil
Benzyl Alcohol 1.5 ml 3% BA
Syringes 3cc & 5/10cc
18 or 20 gauge needles
Vial
Sterile Vial
Whatman sterile filter

Procedure:

measure 10 grams of powder
place the powder in the vial
add BA to the vial
heat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)
add the oil to the vial but save 2 ml of oil in the syringe for later
gently shake the vial.
reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stove
place an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filter
place another needle in the sterile vial to relieve the pressure
draw out the solution with a syringe and run it though the Whatman filter
take the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.

Note: If you have more than the equivalent of 10 grams of Equipoise - boldenone undecylenate - , it is recommended that you do the conversion all at the same time to avoid having to measure and calculate 5 or 10 gram equivalents each time.


Test testosterone propionate

Powder: 5 grams
Produces: 50 ml @ 100 mg/ml

Requirements:

5 grams test testosterone propionate
36.25 ml sesame oil
Benzyl Alcohol 2.5 ml 5% BA
Benzyl Benzoate 7.5 ml 15% BB
Syringes 3cc & 5/10cc
18 or 20 gauge needles
Vial
Sterile Vial
Whatman sterile filter

Procedure:

measure 5 grams of powder
place the powder in the vial
add BA to the vial
add BB to the vial
heat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)
add the oil to the vial but save 2 ml of oil in the syringe for later
gently shake the vial.
reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stove
place an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filter
place another needle in the sterile vial to relieve the pressure
draw out the solution with a syringe and run it though the Whatman filter
take the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.

Test testosterone propionate

Powder: 10 grams
Produces: 100 ml @ 100 mg/ml

Requirements:

10 grams test testosterone propionate
72.5 ml sesame oil
Benzyl Alcohol 5 ml 5% BA
Benzyl Benzoate 15 ml 15% BB
Syringes 3cc & 5/10cc
18 or 20 gauge needles
Vial
Sterile Vial
Whatman sterile filter

Procedure:

measure 10 grams of powder
place the powder in the vial
add BA to the vial
add BB to the vial
heat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)
add the oil to the vial but save 2 ml of oil in the syringe for later
gently shake the vial.
reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stove
place an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filter
place another needle in the sterile vial to relieve the pressure
draw out the solution with a syringe and run it though the Whatman filter
take the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.

Deca-Durabolin - nandrolone decanoate -

Powder: 5 grams
Produces: 25 ml @ 200 mg/ml

Requirements:

5 grams Deca-Durabolin - nandrolone decanoate - - powder
18.75 ml sesame oil
Benzyl Alcohol 1.25 ml 5% BA
Benzyl Benzoate 1.25 ml 5% BB
Syringes 3cc & 5/10cc
18 or 20 gauge needles
Vial
Sterile Vial
Whatman sterile filter

Procedure:

measure 5 grams of powder
place the powder in the vial
add BA to the vial
add BB to the vial
heat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)
add the oil to the vial but save 2 ml of oil in the syringe for later
gently shake the vial.
reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stove
place an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filter
place another needle in the sterile vial to relieve the pressure
draw out the solution with a syringe and run it though the Whatman filter
take the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.

Deca-Durabolin - nandrolone decanoate -

Powder: 10 grams
Produces: 50 ml @ 200 mg/ml

Requirements:

10 grams Deca-Durabolin - nandrolone decanoate - - powder
37.5 ml sesame oil
Benzyl Alcohol 2.5 ml 5% BA
Benzyl Benzoate 2.5 ml 5% BB
Syringes 3cc & 5/10cc
18 or 20 gauge needles
Vial
Sterile Vial
Whatman sterile filter

Procedure:

measure 10 grams of powder
place the powder in the vial
add BA to the vial
add BB to the vial
heat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)
add the oil to the vial but save 2 ml of oil in the syringe for later
gently shake the vial.
reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stove
place an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filter
place another needle in the sterile vial to relieve the pressure
draw out the solution with a syringe and run it though the Whatman filter
take the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.

 

[jurgensplurgen]

trenbolone

Note: this conversion is not for the pellet form

Powder: 10 grams
Produces: 100 ml @ 100 mg/ml

Requirements:

10 grams trenbolone
87.5 ml sesame oil
Benzyl Alcohol 5 ml 5% BA
Syringes 3cc & 5/10cc
18 or 20 gauge needles
Vial
Sterile Vial
Whatman sterile filter

Procedure:

measure 10 grams of powder
place the powder in the vial
add BA to the vial
heat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)
add the oil to the vial but save 2 ml of oil in the syringe for later
gently shake the vial.
reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stove
place an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filter
place another needle in the sterile vial to relieve the pressure
draw out the solution with a syringe and run it though the Whatman filter
take the other syringe with 2ml of oil (saved previously) and run it through the Whatman filter into the solution.

Winstrol

Note: there is a tendency to ruin the product during conversion so only use one gram at a time

Powder: 1 gram
Produces: 20 ml at 50 mg/ml

Requirements:

1 gram of winstrol
one 20 ml glass vial or larger
one 20 ml sterile glass vial or larger
one 0.45 Whatman sterile syringe filter
two 5 or 10 ml syringes
two 3 ml syringes
three 18 or 20 gauge pins
two 22 gauge pins
17 ml of sesame seed oil
0.2 ml of benzyl alcohol
2 ml of Mr.T super solvent

Procedure:

measure one gram of powder
draw out 2 ml of the Mr. T super solvent using one of the 3 ml syringes
place the measured powder in the open vial and add the solvent
place the rubber stopper back on the vial and put one of the 20 gauge pins in the stopper
place the vial in a small pan and place the pan on the eye of the stove
heat until the powder dissolves into a liquid (usually around 239.8-242 degrees F)
turn off the heat and let it cool down in the pan to room temperature (approx. 15 minutes)
heat the oil in a suitable container in the oven until it reaches a minimum of 212 degrees F to sterilise it (it will be necessary to use slightly more oil than is required as all of it will not be able to be utilised)
draw out 0.2 ml of benzyl alcohol (this will account for 1% of the solution so make sure the measurement is correct)
add the benzyl alcohol to the solution in the vial and shake very gently
draw out the oil with the 10 ml syringe (make sure the oil has cooled down somewhat before doing this)
add 15 ml of the oil (saving 2 ml for later) to the solution in the vial and shake very gently Note: If the winstrol begins to clump back up, reheat the solution (place in a pan, put the pan on the eye of the stove and heat until it liquefies again) and allow it to cool down slowly
place one of the 18 gauge pins in the sterile, unopened vial and attach the Whatman sterile filter
draw out the solution using the other 10 ml syringe, attach to the filter, and slowly press the solution out into the sterile vial
use the previously saved 2 ml of oil in the other syringe and run it through the filter to ensure that all the Winstrol passes through
after the filtering process, leave the pin in the sterile vial and remove the filter
place the vial in a pan and place the pan on the eye of the stove
heat for 15-20 minutes, remove from heat, and let it cool down to room temperature (approx. 15 minutes)

The finished solution will be light-gold in colour.
Ensure that you follow the guidelines carefully for this conversion.

For conversions larger than one gram, refer to the powder conversion calculator at the top of this page.


-------------------------------------------------------


POWDER TO LIQUID ORAL CONVERSIONS:


Anadrol
Powder: per 1 gram of Oxymetholone
Produces: Highest concentration made - 50 mg/ml

Requirements:

1 gram of Oxymetholone powder
1 beaker suitable for holding the volume of liquids
8.4 ml of PEG 300
10.5 ml 190 Proof Grain Alcohol

Anavar
Powder: per 1 gram of Oxandrolone
Produces: Highest concentration made - 20 mg/ml

Requirements:

1 gram of Oxandrolone powder
1 beaker suitable for holding the volume of liquids
9.8 ml of PEG 300
39.2 ml of 190 Proof Grain Alcohol

Armidex
Powder: per 1 gram of Anastrozole
Produces: Highest concentration made - 5 mg/ml

Requirements:

1 gram of Anastrozole powder
1 beaker suitable for holding the volume of liquids
19.9 ml of PEG 300
179.1 ml of 190 Proof Grain Alcohol

Clomid
Powder: per 1 gram of Clomiphene Citrate
Produces: Highest concentration made - 50 mg/ml

Requirements:

1 gram of Clomiphene Citrate
1 beaker suitable for holding the volume of liquids
7.6 ml of Glycerol
11.3 ml of 190 Proof Grain Alcohol

Clomid
Powder: per 1 gram of Clomiphene Citrate
Produces: Highest concentration made - 50 mg/ml

Requirements:

1 gram of Clomiphene Citrate
1 beaker suitable for holding the volume of liquids
8.4 ml of PEG 600
10.5 ml of 190 Proof Grain Alcohol

Dianabol
Powder: per 1 gram of Methandrostenolone
Produces: Highest concentration made - 50 mg/ml

Requirements:

1 gram of Methandrostenolone powder
1 beaker suitable for holding the volume of liquids
19 ml of 190 Proof Grain Alcohol

Femara
Powder: per 1 gram of Letrozole
Produces: Highest concentration made - 5 mg/ml

Requirements:

1 gram of Letrozole powder
1 beaker suitable for holding the volume of liquids
19.9 ml of PEG 300
179.1 ml of 190 Proof Grain Alcohol

Nolvadex
Powder: per 1 gram of Tamoxifen Citrate
Produces: Highest concentration made - 20 mg/ml

Requirements:

1 gram of Tamoxifen Citrate
1 beaker suitable for holding the volume of liquids
19.6 ml of Glycerol
29.4 ml of 190 Proof Grain Alcohol

Nolvadex
Powder: per 1 gram of Tamoxifen Citrate
Produces: Highest concentration made - 20 mg/ml

Requirements:

1 gram of Tamoxifen Citrate
1 beaker suitable for holding the volume of liquids
9.8 ml of PEG 600
39.2 ml of 190 Proof Grain Alcohol

Proviron
Powder: per 1 gram of Mesterolone
Produces: Highest concentration made - 50 mg/ml

Requirements:

1 gram of Mesterolone
1 beaker suitable for holding the volume of liquids
8.4 ml of PEG 300
10.5 ml of 190 Proof Grain Alcohol

Winstrol
Powder: per 1 gram of Stanozolol
Produces: Highest concentration made - 25 mg/ml

Requirements:

1 gram of Stanozolol
1 beaker suitable for holding the volume of liquids
7.8 ml of PEG 300
31.2 ml of 190 Proof Grain Alcohol

For all of the above conversions requiring PEG and 190 Proof Alcohol, use the following procedure:

place a sufficient amount of water in a pan and place on the stove
remove from heat when the water reaches boiling temperature
place the powder and the PEG in the beaker
immerse the beaker in the pan of water so that the water is level with the top of the contents of the beaker
gently swirl or stir the contents of the beaker until the solution is clear (reheat the water if necessary)
remove the beaker from the water
allow the PEG to cool down
slowly add the 190 Proof Alcohol to the mixture
gently stir until fully mixed

For all of the above conversions where PEG is not required, use the following procedure:

mix powder and 190 Proof Alcohol in the beaker
gently swirl or stir the contents of the beaker until the solution is clear
the majority of powders which do not require PEG will dissolve readily but for those that are troublesome, refer to the heating procedure as outlined above

In the event that 190 Proof Grain Alcohol (EverClear) is unavailable, then substitute Bacardi 151.

Flavoured oils can also be added to mask the taste if that is your preference.

 

[colochine]

Heavyiron is the man. He an admin at a board I mod for and I have a lot of respect for him.

 

[jurgensplurgen]

Yeah, I kinda blatently stole this, but it was the best, most thorough collection of recipes I'd seen, and not all muffin tins and 10% ba. When it comes to knowledge, don't be ashamed to take from the best. 🙂

 

[colochine]

Lol exactly good thread jurgens!!

 

[GRIM]

you gave credit to op

 

[gator]

Very nice.

 

[xxd1v3r]

i like this list of recipes one day im gonna try my hand at homebrewing

 

[gator]

great info I have came across a bro selling small amounts of compounds so i can pick up 10 grams of var i want to make a suspension at 25mg per ml one day i want to brew my own gear as well and get good enough to make blends once I get all the brewing supplies I can save money and i think I would really enjoy the process. plus I know whats in my gear Im sure I will fuck some shit up at first lol. maybe one day i will get good and I can hook up my EG brothers.

 

[genesys]

While those recipes are workable, I much prefer 2% BA to 5% BA. This is not because BA causes injection site pain as is commonly believed, on the contrary, BA is a powerful anesthetic, albeit of very short duration. There is simply no need to use more than 2%.

Gator, you wanna brew and need some advice, I know a guy that knows a guy thats pretty good at it.

 

[jurgensplurgen]

agree, genasys. I just copied these recipes over, as they are better than many of the ones I see floating around. It's probably best to use as little BA as you can get away with, though the specific % will vary depending on the compound and concentration desired.
5% isn't going to kill you or anything, but why make your gear any more painful than absolutely necessary?

On the other hand, new brewers often want to err on the side of caution and figure better more than not enough and risk it crashing out.

 

[Wabbitt]

Mmm, yummy. They all sound delicious. Now I need a recipe for pot brownies!

 

[homegrown]

Heavyiron is the man. He an admin at a board I mod for and I have a lot of respect for him.

The guy is a personal friend of mine and ya, he has some knowledge on a couple different things.. Not to mention a REALLY nice guy.

 

[Heavy hitter]

Nice. Real nice.

 

[chris32]

someone had told me that different substances had to be cooked at different temperatures. like tren 140 degrees test e @ like 275 plus. is this true?

 

[colochine]

someone had told me that different substances had to be cooked at different temperatures. like tren 140 degrees test e @ like 275 plus. is this true?

To a certain extent yea. The point in heating them is to melt the compound which liquifies it and allows it to form a solution easier. It is however possible to get certain compounds into solution with very minimal heat alongside of the proper solvents.

 

[chris32]

thanks colo

 

[colochine]

Any time bro.

 

[bhcolex50x]

Great read

 

[bigdude]

No bb?
I see the ba but that's all